Italiano
English
Français
Español
+39 0131 216505 
AP RACING
Gieffe Racing is Exclusive official distributor for Italy of products AP RACING
www.apracing.com
1642 products found in the following categories
If the products you are looking for are not available online, contact Gieffe Racing for information and for purchase.
Braking (1180)
Master cylinders and accessories (300)
AP RACING REMOTI (5)
Reservoirs
A large capacity (280cm³) remote plastic reservoir with 1 or 2 Outlet, with or without bellows.
- Accepts Ø 5/16" diameter hose.
- Supplied complete with cap 4325-148 and adaptor.
Specs 1 outlet
Specs 2 outlets
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP2293-69
Description1 outlet reservoir with bellows
Code4342-372
Description1 outlet reservoir without bellows
CodeCP2293-85
Description2 outlet reservoir with bellows
CP6026 (1)
Master Cylinders AP Racing
A lightweight double ended hand brake master cylinder, designed for use with dual circuits where diagonal brake split is mandatory. CP6026 is mounted using rod ended spherical bearings.
Features:
- Double ended hand brake Master Cylinder.
- For use with dual circuits where diagonal …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP6026-91
DescriptionAP RACING double ended hand brake cylinder
CP2623 (47)
Master Cylinders AP Racing
A lightweight compact master cylinder suitable for all brake and clutch applications especially where space is restricted.
Features:
- Aluminium Alloy Body.
- Short travel to cut-off.
- Non Captive Cylinders available.
- Replaced CP3823 cylinder family.
Customer drawing
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP2623-92NC
DescriptionAP RACING master cylinder CP2623 Ø 19,1 mm without push-rod
CodeCP2623-88PRM115
DescriptionAP RACING master cylinder CP2623 Ø 14 mm with PRM push-rod
CodeCP2623-88PRM160
DescriptionAP RACING master cylinder CP2623 Ø 14 mm with PRM push-rod
CP4400 (26)
Master Cylinders AP Racing
A Compact Master Cylinder which has been designed with a ‘centre lock’ bulkhead fixing (10mm to 22mm Max) to meet the installation requirements of composite structure racing cars.
Features:
- Inlet and Outlet ports are positioned at the end of the master cylinder away from …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP4400-88PRM135E
DescriptionAP RACING master cylinder CP4400 Ø 14,0 mm with PRM push-rod
CodeCP4400-88PRT135E
DescriptionAP RACING master cylinder CP4400 Ø 14,0 mm with PRT push-rod
CodeCP4400-88PRT180E
DescriptionAP RACING master cylinder CP4400 Ø 14,0 mm with PRT push-rod
CP4623 (44)
Master Cylinders AP Racing
A compact leightweight master cylinder similar to CP2623 but with a 60° mounting flange offset to give improved access to mounting bolts. Suitable for all brake and clutch applications especially where space is restricted.
Features:
- Aluminium Alloy Body.
- Short travel to cut-off …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP4623-88PRM115
DescriptionAP RACING master cylinder CP4623 Ø 14,0 mm with PRM push-rod
CodeCP4623-88PRM160
DescriptionAP RACING master cylinder CP4623 Ø 14,0 mm with PRM push-rod
CodeCP4623-88PRT115
DescriptionAP RACING master cylinder CP4623 Ø 14,0 mm with PRT push-rod
CP5623 (8)
Master Cylinders AP Racing
A lightweight compact master cylinder identical to CP2623 but has metric threads.
Suitable for all brake and clutch applications especially where space is restricted.
Features:
- Aluminium Alloy Body.
- Short travel to cut-off standard.
- Non Captive Cylinders available.
Customer …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP5623-89PRM115
DescriptionAP RACING master cylinder CP5623 Ø 15,0 mm with PRM push-rod
CodeCP5623-90PRM115E
DescriptionAP RACING master cylinder CP5623 Ø 15,9 mm with PRM push-rod
CodeCP5623-91PRM115E
DescriptionAP RACING master cylinder CP5623 Ø 17,8 mm with PRM push-rod
CP6461 (9)
Master Cylinders AP Racing
Master cylinder family, identical to CP6465, but with a stronger Pushrod design.
Customer drawing
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP6461-149PRTE
DescriptionAP RACING master cylinder CP6461 Ø 14,9 mm with PRT push-rod
CodeCP6461-162PRTE
DescriptionAP RACING master cylinder CP6465 Ø 16,2 mm with PRT push-rod
CodeCP6461-173PRTE
DescriptionAP RACING master cylinder CP6465 Ø 17,3 mm with PRT push-rod
CP6465 (9)
Master Cylinders AP Racing
The ultimate in master cylinder efficiency over traditional cylinder designs.
This cylinder operates on the pull rather than push principle of other cylinders.
It has a built in trunnion mounted in needle roller bearings for direct mounting to the balance bar.
INLET CONNECTION REQUIRED …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP6465-149PRME
DescriptionAP RACING master cylinder CP6465 Ø 14,9 mm with PRM push-rod
CodeCP6465-162PRME
DescriptionAP RACING master cylinder CP6465 Ø 16,2 mm with PRM push-rod
CodeCP6465-173PRME
DescriptionAP RACING master cylinder CP6465 Ø 17,3 mm with PRM push-rod
CP6467 (9)
Master Cylinders AP Racing
A new pull type cylinder (Similar to CP6465 family) trunnion mounted, featuring a center valve configuration which helps to improve cylinder performance and seal durability. Choice of 9 bore sizes.
- A pull type design, more efficient than conventional type master cylinders virtually identical …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP6467-149PRME:S
DescriptionAP RACING master cylinder CP6467 Ø 14,9 mm with PRME push-rod
CodeCP6467-162PRME:S
DescriptionAP RACING master cylinder CP6467 Ø 16,2 mm with PRME push-rod
CodeCP6467-173PRME:S
DescriptionAP RACING master cylinder CP6467 Ø 17,3 mm with PRME push-rod
CP6468 (5)
Master Cylinders AP Racing
Pull type bearing mounted. More efficient than conventional master cylinders.
- Aluminium Alloy Body.
- Has a built in bearing mounted in needle roller bearing for direct mounting to the balance bar.
- Low profile inlet and outlet.
- Special “plug in” inlet connection can be …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP6468-149PRME
DescriptionAP RACING master cylinder CP6468 Ø 14,9 mm with PRME push-rod
CodeCP6468-162PRME
DescriptionAP RACING master cylinder CP6468 Ø 16,2 mm with PRME push-rod
CodeCP6468-173PRME
DescriptionAP RACING master cylinder CP6468 Ø 17,3 mm with PRME push-rod
CP7198 (14)
Master Cylinders AP Racing
Push type design, flange mounted.
- Centre valve configuration, helps to improve cylinder performance & seal durability.
- For use in ABS and high pressure applications.
- Flange mounted.
- Suitable for most brake and particularly clutch applications.
- Short travel to cut-off …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP7198-90PRM163
DescriptionAP RACING master cylinder CP7198 Ø 15,9 mm with PRM push-rod
CodeCP7198-90PRT163
DescriptionAP RACING master cylinder CP7198 Ø 15,9 mm with PRT push-rod
CodeCP7198-91PRM163
DescriptionAP RACING master cylinder CP7198 Ø 17,8 mm with PRM push-rod
CP7398 (3)
Master Cylinders AP Racing
Push type design, similar to CP7198 type but with a 60° mounting fl ange offset.
- Centre valve confi guration, helps to improve cylinder performance & seal durability.
- For use in ABS and high pressure applications.
- Suitable for most brake and particularly clutch applications.
- …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP7398-91PRT128
DescriptionAP RACING master cylinder CP7198 Ø 17,8 mm with PRT push-rod
CodeCP7398-92PRT128
DescriptionAP RACING master cylinder CP7198 Ø 19,1 mm with PRT push-rod
CodeCP7398-94PRT128
DescriptionAP RACING master cylinder CP7198 Ø 22,2 mm with PRT push-rod
CP7854 (8)
Master Cylinders AP Racing
A high efficiency single circuit, short push type master cylinder. Fixed through a trunnion system running in needle roller bearings and with a one piece piston / push rod it offers a significant improvement in efficiency over traditional cylinder designs.
Features:
- Hard anodised …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP7854-88PRTE
DescriptionAP RACING master cylinder CP7854 Ø 14,0 mm with PRT push-rod
CodeCP7854-89PRTE
DescriptionAP RACING master cylinder CP7854 Ø 15,0 mm with PRT push-rod
CodeCP7854-90PRTE
DescriptionAP RACING master cylinder CP7854 Ø 15,9 mm with PRT push-rod
CP7855 (9)
Master Cylinders AP Racing
A high efficiency single circuit, short push type master cylinder.
Fixed through a spherical bearing and with a one piece piston / push rod it offers a significant improvement in efficiency over traditional cylinder designs.
Features:
- Hard anodised Aluminium Alloy body.
- Compact …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP7855-88PRTE
DescriptionAP RACING master cylinder CP7855 Ø 14,0 mm with PRT push-rod
CodeCP7855-89PRTE
DescriptionAP RACING master cylinder CP7855 Ø 15,0 mm with PRT push-rod
CodeCP7855-90PRTE
DescriptionAP RACING master cylinder CP7855 Ø 15,9 mm with PRT push-rod
CP9093 (14)
Master Cylinders AP Racing
Flange mounted, push type design.
- Centre valve configuration, helps to improve cylinder performance & seal durability.
- For use in ABS and high pressure applications.
- Flange mounted.
- Suitable for most brake and particularly clutch applications.
- Short travel to cut-off …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP9093-90PRM163
DescriptionAP RACING master cylinder CP9093 Ø 15,9 mm with PRM push-rod
CodeCP9093-90PRT163
DescriptionAP RACING master cylinder CP9093 Ø 15,9 mm with PRT push-rod
CodeCP9093-91PRM163
DescriptionAP RACING master cylinder CP9093 Ø 17,8 mm with PRM push-rod
AP Racing (51)
Code
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP5854-92RK
DescriptionAP RACING repair kit for master cylinders CP5854, Ø 19,1 mm
CodeCP6465-149RK
DescriptionAP RACING repair kit for master cylinders CP6461, CP6465 & CP6468 - Ø 14,9 mm
CodeCP6465-162RK
DescriptionAP RACING repair kit for master cylinders CP6461, CP6465 & CP6468 - Ø 16,2 mm
DIAFRAMMI AP RACING (3)
Reservoirs
Rubber bellows.§
CP2709-156 (smal): For use with reservoir cap LBNM9057AXBR, on the following reservoir assemblies:
- All CP4709 Series except -12/ -13/ 16 & -19 variants.
- Use CP4709-25 Catch tank kit.
CP2293-174 (medium): For use with reservoir cap 3847-246, on the …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP2293-173
DescriptionBellows - large
CodeCP2293-174
DescriptionBellows - medium
CodeCP2709-156
DescriptionBellows - small
Fittings and Accessories (17)
CP4709-25 catch tank kit is an alternative fluid surge system to traditional bellows without compromising reservoir capacity.
The kit comprises of:
- 1 x catch tank.
- 75cm of Silicone tube.
- 3 x nipples with washers and nuts.
- 1 x T-Connector.
- 2 x Cable ties.
- 4 x mounting …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP4709-25
DescriptionCatch Tank
CodeCP6465-11
DescriptionInlet connection (straight) for CP6465
CodeCP6465-10
DescriptionInlet connection 75° for CP6465
AP RACING REGULAR (3)
Reservoirs
A medium (195 cm³) plastic reservoir midway between CP4709 and CP2293-141/143 types.
CP4773-102 Bellows included.
Specs
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP4773-2
DescriptionReservoir Metric
CodeCP4773-3
DescriptionReservoir Push-on
CodeCP4773-1
DescriptionReservoir UNF
AP RACING XLARGE (2)
Reservoirs
An extra large capacity (340 cm3) plastic reservoir that screws directly into all master cylinders with 7/16" UNF inlet thread or can be used remotely.
Available in central or offset design and supplied with the appropriate fitting.
Reservoirs come with rubber bellows to prevent entry of …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP2293-163
DescriptionReservoir XL with central outlet
CodeCP2293-162
DescriptionReservoir XL with offset outlet
AP RACING XXL 400cc (2)
Reservoirs
400cc capacity plastic reservoirs, with either a central (CP2293-185) or offset (CP2293-178) outlets, supplied with3/8”UNF push on adaptor fitting.
- Volume = 400cm³ (24.4in³).
- Supplied complete with cap 4325-148 and CP2623-250 adaptor.
- Supplied without bellows, …
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP2293-185
DescriptionReservoir XL with central outlet
CodeCP2293-178
DescriptionReservoir XXL (400cc) with offset outlet
AP RACING Ø RIDOTTO (11)
Reservoirs
Plastic tanks with central connection, can be screwed directly onto the brake pump or mounted separately.
Specifications
View model/categoryCode
Description
Price (VAT excl.)
Discount price
VAT price
Shipping
CodeCP4709-17
DescriptionSmall diameter reservoir - medium Metric
CodeCP4709-20
DescriptionSmall diameter reservoir - medium Push-on
CodeCP4709-14
DescriptionSmall diameter reservoir - medium UNF
Highlights
Choosing the AP Racing brake discs
Installation Instructions, face characteristics... a fundamental legend to …
Important Note Formula Big Brake Kit
IMPORTANT NOTE: Before purchasing or installing a formula big brake kit, …
Hose & fittings assembly
Some important information on: - measurements and fittings categories - …
Copper grease: where to use it and why
Copper grease is used in particular in motorsport for its peculiar characteristics of resistance to high temperatures, high pressures and durability over time.
