Nuts, Bolts & Fasteners

BlueFast Floating anchor nuts free of cadmium and chrome IV

In 25CD4 / C45 steel, zinc-nickel finish with trivalent chromium treatment and MoS2 (bolybdenum disulfide) layer. Identifiable by the Blue Dot. Hardness max 44 HRC. Self locking - 1100 MPa - 235 ° C.

Performance compliant with LN65016 standard.

BlueFast K-Nuts free of cadmium & chrome VI.

Anchor nut model KM1000
C1050 steel, cadmium finish with anti-friction treatment KayLube Moly. It preserves the mechanical properties up to 235° C.
Complies with standard AECMA 2053 (resistance test).

Precision formed Hexagon nuts, also referred to as 6-point nuts, in wrenchable format and offer tremendous versatility for design and functional requirements. All of these Nuts are small, lightweight, self locking and have an extremely high tensile strength.

AeroCatch are aerodynamic, low profile panel fasteners setting new standards in the 21st century. Providing a wide variety of fixing solutions for Motorsport, Specialist Vehicles, Marine & Transportation. AeroCatch are proudly manufactured in England and distributed worldwide...beware of counterfeits!!
Various models are available; with or without locking: Plus Flush and Flush. The Plus Flush has a 2.5 mm thick flange that mounts on top of the panel while the Flush provides for flush mounting. Made Grivory HT2V-5H (ISO PA 6T/66, glass reinforced polymer to 50%, with particular resistance to high temperatures and aging) and stainless steel.
Each kit contains 2 hooks complete with pins and mounting hardware.

Camloc quarter turns fasteners 2600 series

•  Safe Mechanical Fastener System
•  Locking Or Unlocking By Quarter Turn
•  Long Life - High Number Of Operating Cycles
•  Quarter Turn Slotted Head Fastener
•  Hand Or Tool Operated
•  Service Friendly - Time Saving And Cost Cutting
•  Vibration Resistant

Camloc technical data sheet

Designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel.
The ejecting mechanism also gives an instant signal that the fastener is unlocked.
This Dzus Fastener has a flush head and is made of zinc plated mild steel.

Knowledge from competition experience has led the manufacturer to use a dissimilar material for the nut from that for the
wheel stud. The additional copper coating of the nut assures security.

A.I.Tech's wheel studs, either spline or double-threaded, are made of extremely high-strength steel; the threads are obtained by stabilised rolling (a specific system to avoid fatigue cracks). They are combined with steel wheel nuts machined from billet and copper-plated to optimise screwing onto the studs even at the high temperatures resulting from prolonged use of the brakes in racing.

Stainless steel quick release bonnet pins with thread 12x1.50 (sold in pairs).

The Pip Pins are suitable for most applications where quick access is necessary. For use on body panels, engine covers and nose cones.

Terry springs for closing lids, perfect for rally and touring cars.

Slide-latch and bush are sold separately.

Universal joint for use in racing with a very high load resistance.
It features a rubber boot that protects the joint from dust, increasing longevity.
This coupling can be used as a joint of gear control, starter, steering box, etc. ...

NAS bolts Series 1303/6603, 160.000PSI resistance.

These fine-threaded, dimpled-head hex bolts have a minimum tensile strength of 160,000 psi and a minimum shear strength of 95,000 psi. Thread length is consistent within each diameter (1103/6203 series have a shorter thread), and grips are available in 1/16” increments beginning at 1/16”. Used in applications where a premium-quality, high strength bolt is necessary.

Cable Tie 50lb 7" Ultraviolet Resistant Black Nylon with Stainless Steel Locking Device Bulk
In pack of 100 pcs.

Nylon or metal supports for the fastening of the ties.

Easy to unroll and tear, good abrasion resistance and outdoor exposure. Excellent resistance to water. Writable surface with a glossy finish. Width 50mm, length 50m

Aluminum tapes of different thicknesses for each type of application, flame resistant, excellent sealants.

Gloss clear polyurethane anti-erosion Helicopter tape, thickness 0.20 mm, available in rolls 25, 50 e 100 mm x 33mt.
Ideal for protecting the body.

For further information download data sheet

The tape PVC10-mil is designed to protect the surface on which it is applied by rubbing, erosion.
Is usually used for the protection of tanks.