600 & 700 Series hose for brake and clutch

The following Goodridge 600 series T piece crimp fittings are compatible with 600 & 700K series AN-03 bore sizes.

TUV and DOT certification has been achieved in all available 600 series crimp fitting materials.

_ _ _ _ _
Fitting type:
Swage/Crimp

Applications:
Brake, Clutch & Hydraulic

Compatible hose:
600 series (AN-03)
700 series (AN-03)

Material:
C, Z1

Example part no:
S5135-03Z1 = Silver Plated Carbon Steel

Notes:
Suitable for Motorsport and road use.

Please order crimp collars separately.

The following Goodridge 600 series banjo crimp fittings are compatible with 600 & 700K series AN-02 & AN-03 bore sizes. (700K AN-03 only)

TUV and DOT certification has been achieved in all available 600 series crimp fitting materials.

_ _ _ _ _
Fitting type:
Swage/Crimp

Applications:
Brake, Clutch & Hydraulic

Compatible hose:
600 series (AN-02 & AN-03)
700 series (AN-03)

Material:
C, CBK, CH, D, P, Z1

Anodised Aluminium Colour:
BK (Black), D (Blue), RD (Red)

Example part no:
S5092-03DRD = Anodised Aluminium Red

Notes:
Suitable for Motorsport and road use.

Please order crimp collars separately.

Crimp collars for use with AN-02 & AN-03 fittings

Brake lines are a safety critical item and therefore, if being retro-fitted to a vehicle, must follow the correct routing; secured as per the original equipment manufacturers recommendations.

The following line locating brackets are OEM specific, to be used to locate 600 series AN-03 brake lines.

Please note: Some line locators require crimping - specialist knowledge and equipment is required to assemble crimp fittings.

_ _ _ _ _
Applications:
Brake lines

Compatible hose:
600 series (AN-03)

Notes:
Suitable for road use.

Material:
C, NY (Nylon), P, Z1

Available in UNF, Metric and BSP type thread fitments; single and double variations.

In addition, Goodridge manufactures a range of brake light switch banjo bolts, available in a range of materials, colours, lengths and threads.

Copper crush washers can be found in the Ancillary section

_ _ _ _ _
Fitting type:
Banjo Bolt

Applications:
Brake / Clutch lines

Compatible fitting:
600 series

Material:
Stainless Steel, Chrome plated, Aluminium, Zinc plated, Silver plated carbon steel

Anodised Aluminium Colour:
BK (Black), D (Blue), RD (Red)

Example Part No:
992-03-31DBU = Anodised Aluminium Blue

Notes:
Long bolts are for use with 5091, 5095, 5096.

‘Under hex’ length:

Short: 18mm (S)
Single: 20mm
Single Long: 25mm (L)
Double: 30mm
Double Long: 40mm (L)

Goodridge developed bleed nipple banjo bolts in response to concerns about the length of time required to bleed hydraulic systems. Air can now be bled from the master cylinder end of the system.

In addition, Goodridge manufactures a range of bleed nipples, including speed bleeders.
_ _ _ _ _
Fitting type:
Banjo Bolt

Applications:
Brake / Clutch lines

Compatible hose:
600 series

Material:
Stainless Steel, Chrome plated, Zinc plated, Silver plated carbon steel

Goodridge manufacture a range of adaptors suitable for brake systems.

Block adaptors can be bought separately to ensure the system is routed correctly.

_ _ _ _ _
Fitting type:
Block adaptor

Applications:
Brake systems

Compatible hose:
600 series

Material:
Brass, Stainless Steel, Zinc plated, Silver plated carbon steel