Newton vent valves

TRL Valves are suitable for Motorsport and can be used on cars up to and above F1, where they will be subjected to violent movement.
These valves are designed to be installed in-line, stored in a vertical position.

The TPV In-Line valves are suitable for use in more general applications , such as everyday automotive use and fuel injection engines.

They are designed so no standing gas is lost when the vehicle is at rest. They open when fuel is drawn from the tank and shut once activity ceases. Any pressure build-up will open the valve and will close once the pressure is released. These valves can be mounted at any angle.

The big ball Valves are designed primarly for car fuel tanks in motor sport applications, where they will be subjected to violent movement. The two- ball valves are open to the atmosphere so vapour can collect inside the vehicle. All installations should be piped to the outside of the vehicle or connected to a charcoal canister. Please see the specification for each product to see the correct installation advice.

The Small Tank Valves - are designed for Motorsport use on motorcycle fuel tanks, where they will be subjected to violent movement. The two ball valves should be piped to the outside of the vehicle or connected to a charcoal canister, in order to vent the vapour that collects inside the fuel tank. They need to be mounted vertically to operate correctly.