Reservoirs

A medium (195 cm³) plastic reservoir midway between CP4709 and CP2293-141/143 types.

CP4773-102 Bellows included.

Specs

A large capacity (280cm³) remote plastic reservoir with 1 or 2 Outlet, with or without bellows.

- Accepts Ø 5/16" diameter hose.
- Supplied complete with cap 4325-148 and adaptor.

Specs 1 outlet
Specs 2 outlets

An extra large capacity (340 cm3) plastic reservoir that screws directly into all master cylinders with 7/16" UNF inlet thread or can be used remotely.
Available in central or offset design and supplied with the appropriate fitting.
Reservoirs come with rubber bellows to prevent entry of moisture and dirt and helps prevent spillage.

- Central or Offset Outlets.
- Supplied with CP2293-166 (08 05 436) bellows to minimise entry of moisture, dirt and help prevent spillage.
- Supplied complete with cap 4325-148 (08 05 417) and adaptor..

Specs CP2293-162
Specs CP2293-163

400cc capacity plastic reservoirs, with either a central (CP2293-185) or offset (CP2293-178) outlets, supplied with3/8”UNF push on adaptor fitting.
- Volume = 400cm³ (24.4in³).
- Supplied complete with cap 4325-148 and CP2623-250 adaptor.
- Supplied without bellows, but optional bellows fitmentavailable, CP2293-178 & -185 can be fitted withCP2293-173 bellows if required.
However, the plastic insert and rubber seal must be removed, otherwise the bellow, will not fit correctly.

Plastic tanks with central connection, can be screwed directly onto the brake pump or mounted separately.

Specifications

Rubber bellows.§

CP2709-156 (smal): For use with reservoir cap LBNM9057AXBR, on the following reservoir assemblies:
- All CP4709 Series except -12/ -13/ 16 & -19 variants.
- Use CP4709-25 Catch tank kit.

CP2293-174 (medium): For use with reservoir cap 3847-246, on the following reservoir assemblies.
- CP2293-141.
- CP2293-143.
- CP2293-69.
- CP2293-85.
- CP4623-7.
- CP4623-8.
- CP4623-9.
- CP4623-10.
- 4342-355

CP2293-173 (large):- For use with reservoir cap 3847-246, on the following reservoir assemblies:

  - CP2293-162.
  - CP2293-163.

IMPORTANT NOTE:
when fitting new bellows into reservoir remove rubber seal and plastic baffle.

Reservoir and Extension GIRLING.

Tilton’s popular 3-chamber plastic reservoir is value-packed, incorporating many features found in the billet aluminum version at a price that meets most budgets. There is no longer a reason to use three separate plastic reservoirs–this reservoir combines the three into one convenient package.
 

3-Chamber Plastic Reservoir Features:

- Fiberglass reinforced nylon material.
- Three separate internal reservoirs allow for complete evacuation of one without affecting the remaining two.
- Gasket-sealed removable lid allows for easy cleaning.
- Reservoir lid incorporates screens to prevent foreign objects (nuts, bolts, etc.) from falling into reservoir.
- Leak-proof baffle design ensures that fluid remains in reservoir.
- Convenient fluid level indicator windows.
- 2-hole mount provides simple installation onto firewall/bulkhead.
- Available for use with push-on rubber hose or AN-4 braided lines.

Warning: PTFE, EPDM or SBR hose must be used.

Additional info models 72-576 and 72-577
Additional info low profile model (72-578)

Tilton master cylinder tanks, in two versions: with direct mounting on 76 series pumps or 7/16 "-20 connection